TREESCRIPT DUI Page Registry. [Archive]

View Full Version : TREESCRIPT DUI Page Registry.

Ron

August 21st, 2005, 05:40 PM

Here we'll keep a list of numbers assigned to treescripts DUI pages.

Action

1 - OSD - Ron (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3)
2 - Example - Ron (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3)
3-19 - HAI - Mike C
20-29 - NetRemote - Mike C
30-39 - Voice - Mike C
40 - EventExtras.lua (Event Translation)
41 - G2G UI.lua (Remote Event Pump) - Changed name, same function.
42 - G2G UI.lua (Remote Scripting)
43 - G2G UI.lua (Remote Event)
44 - ScriptHelper.lua (File Script)
45 - G2G UI.lua (Push and Load or Update GML)
46 - G2G UI.lua (Verify GML version/load)
50-59 - X10 - Mike C
60 - 69 - File Functions - Dan Ward (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=4330)
70,71 - Ambient Light - Mike C
75 Multiple choice node - headshotfairy (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=7702)
80 - Send Email - Dan Ward
90-99 - Serial Devices - Mike C
100 - 105 GlobalCache - Ron (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3)
110-125 - Outlook - honnt
126,127 - Tieske8
128 OSD2 - Ron
140-159 Ocelot - Todd
160 - 170 New Transport Manager - Ron
171 - 180 ZWave - Ron
200-209 Insteon - Mike C
210-250 Elk M1 - Rob H
251 - SlinkE - Ron (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3)
252 - SlinkE - Hoox.
253 - MediaCast - Ron
260 - Serial Config - Rob
261 - Send SMS,
270 - Scheduler Stop - John
271 - Scheduler Start - John
280 - IMON Soundgraph -pisla
282 - TransportManager Send
290 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
300 - XBMC Remote - NeoMorph
301 - XBMC Listener - NeoMorph
302 - XBMC Pinger - NeoMorph
305 - ANNA interface - NeoMorph
310 - Skype plugin - crisr
311 - Skype plugin - crisr
320-329 - ELK Plugin - harleydude
10120 - PLM Insteon

Conditional

40 - EventExtras.lua (Event Filter)
41 - G2G UI.lua (Remote Girder Conditional) - New name, same function.
50 - AmbientLight
100 - Lua Expression Conditional - mhund
110 - Lua Conditional- honnt
111-112 - File Conditionals - Dan
113 - One Wire Temperature - Dan
114 - RFXCOM - Dan
115, 116 - Time and Date Conditionals - Dan
117 - Sunset / Sunrise Conditional - Dan
118 - X10 State Conditional - Dan
119 - X10 Level Conditional - Dan
126 - Tieske8
160 - 170 New Transport Manager - Ron
171 - 180 ZWave - Ron
320-329 - ELK Plugin - harleydude
900 - 999 - Device Manager

Config

2 -caller id
3 - Zoomplayer - esajesa (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3299)
4 - LDJ - esajesa (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3299)
5 - Weather - Dan (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=4330)
6 - Meedio - esajesa (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3299)
7 - Media Player Classic - esajesa (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=3299)
8 - Sage TV Dan (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=4330)
9 - HAI - Mike C
10 -NetRemote
11 - Caller ID - Mike
12 - NetRetmote - Mike (is this used??)
13 - Voice - Mike
14 - X10 - Mike
15- W800RF32 - Mike
16 - X10 - Mike
17 - SunRiseSet - Mike
18 - RFXCON - Mike
19 - AmbientLight - Mike
20 - NetRemote IR Passthrough - Ron
21 - One Wire - Dan W
22 - Voice Manager - Mike
23 - Voice Manager
40 - G2G UI.lua (Girder To Girder Configuration).
50 - Elk M1 - Rah99
51 - Rah99
52 - LG TV
55,56 - Outlook - honnt
60 - SlinkE
61 - Ocelot - Todd
62 - Nokia - Dan Ward
70 - 75 - Scheduler UI - John H
76 - Nokia, F-Bus SMS Plugin Configuration,
77 - CustomWeather - G5 - Mike C
78 - SunClock - G5 - Mike C
79 - ComponentManager - G5 - Mike C
80 - Russound - Mike C
85 - Geographical Location - mike c
86 - W800RF32 - G5 - mike c
87 - RFXCOM - Rob H
88 - CID Pictures
89 - CID Voice
111-119 - Insteon - Mike C
120 - Zoom Player - Rob H
121 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
122- RSS Feeds - Mike C
123- MediaBridge
124 - License Manager - G5 - Ron
125 - RFXCOM - Marcel/Dan/Mike
126 - HAI OmniStat
127 - Girder Backup - Rick
128 - Unit System
129 - calleridmodem
130 - NetCallerID
131 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
132 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
160 - 170 New Transport Manager - Ron
171 - 180 ZWave - Ron
192 - Transport Manager
193 - Transport Manager
194 - Transport Manager
195 - X10 RF Devices
196 - RFXCOM RF Transmitters
197 - SunRiseSunSet - Mike C - too replace G4 SunRiseSet
198 - AmbientLight - Mike C - replaces G4 AmbientLight
199 - GlobalCache
200 - Visonic RF Transmitters
201 - Anahiah RFID Receivers
202 - Anahiah RFID Transmitters
203 - TCP/IP Lua console interface and event interface
204 - TTSRandomizer
280 - IMON Soundgraph -pisla
300 - XBMC Remote - NeoMorph
302 - XBMC Pinger - NeoMorph
305 - ANNA interface - NeoMorph
320-329 - ELK Plugin - harleydude
400 - IR Profiles
458 - Config Files
459 - File Logging
500 - 510 - Device Manager
520 - Sharp TV Component - Rob H
10066 - Video Capture
10100 - 10119 PLM Insteon

Plugin Numbers
185 to girder id list."DVICO Fusion HDTV" by "Doug Stone"
186 HID plugin Doug Stone
187 Remote Wonder II Ron Bessems
188 Celso, pixel plugin.
EXTENDED SYSTEM
189 GlobalCache
190 Curtis & Diane Wren <curtiswren@comcast.net> XML TV.
FERGUSON
191 X10CM15A
192 JogWheel Infrared Encoder
193 Windows Conditional Plugin
194 RedRay Andrey Nikitin
195 TaskSwitcherEx
196 Rah99 LuaGFX
197 Mike Multimon.
198 baixitou28@hotmail.com, usb ir reciever (Zhao Huxiao )
199 Audigy 2 NX, Andy Vincent
228 Mike MouseControl
229 Dmitrii Kiryanov USB Remote
230 MCE Remote
231 ZipPlugin
232 ComServ
233 DiGiMATiON David McKellar <damc@digimation.ca>
234 IMON
235 Scheduler.
236 Misc Utils Mike.
237 SetWinText Ilia Shramko <ilia@attaboy.ru>
238 CM11/CM12/CM17A
239 HID Plugin
240 ML Server m1duckett
241 Sony777ES m1duckett
242 Serial Plugin - Ron
243 TreeScript - Ron
244 Michael Thomsen, Lintronic.
245 A. Weber YARD.
250 Global Cache
251 Generic Internet Plugin v2.
252 Phidgets encoder Chuck Holbrook <cholbroo@vt.edu>
253 HAI script Mike.
254 SlinkE (Girder 4) Ron
255 Hauppauge PVR-150 and later Jeffrey HArris.
256
257 Winlirc relf <relf@gazinter.net>
260 Marcel - DS1820/DS1920
261 xAP
262 Insteon
263 Promixis WebServer
264 ElkM1
265 SNMP plugin.
266 Bluetooth Proximity Detector. Marcel Howeling.
267 speedFan - Marcel Howeling
268 Foobar.brett_lazenby@wgresorts.com
269 transport - Ron
270 Optimus Display Device - Marcel
271 SLinkEx - Steve Vibert
272 XOsd - Steve Vibert
273 Marcel - HushLCD.
274 Marcel - sonyericsson
280 pisla - IMON Soundgraph
900-1000 reserved for plugin that will not work with Girder and Girder Lite.
901 HAI Omni Wrapper
902 Russound CAV RNET
9998 - Component Manager
9999 - Device Manager
10000 - GPS - MMcM (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=162)
10001 - W800RF32 - Mike C
10002 - PowerLincSerial - Mike C
10003 - X10 - Mike C
10004 - DIVCO Remote
10005 - Caller ID Handler
10006 - AOpen Command Cube
10007 - Voice (SAPI) Events - Mike C
10008 - RFXCON Sensors - Mike C
10009 - One Wire Sensors - Dan W
10010 - SunRiseSet - Mike
10011 - AmbientLight - Mike
10012 - Girder2Girder - John Hind.
10013 - Lutron GrafikEye- Ted (http://www.promixis.com/phpBB2/profile.php?mode=viewprofile&u=7270)
10014 - X10 CM15A - Mike C
10015 - Weather - Mike C
10020 - Elk M1 - Rob H
10021 - Outlook - honnt
10022 - Insteon - Mike C
10023- DSC PowerSeries Security Panel - Mike C
10024 - Ocelot - Todd and Mike
10025 - Russound RNET - Mike C
10026 - ZWave - Ron
10030 - Denon AV receivers - Rah99
10031 -Scheduler UI -JohnH
10032 - Arcam AV Receiver - Kurt Lewis
10033 - Voice Recognition - GB
10034 - BlueTooth - MC and MH
10035 - Nokia, F-Bus SMS Plugin Configuration
10036 - ZoomPlayer
10037 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
10038 - LG TV - Rob H
10039 - RSS Mike C
10040 - MediaBridge Mike C
10041 - RFXCOM - Marcel/Dan/Mike
10042 - HAI OmniStat - Mike C
10043 - Girder Backup - Rick
10044 - UnitSystem
10045 - TransportManager
10046 - Caller ID Modem
10047 - RFXCOM - Rob H
10048 - NetCallerID - Mike C
10049 - X10 RF Devices
10050 - RFXCOM Transmitters
10051 - SunRiseSunSet - Mike C - too replace G4 SunRiseSet
10052 - AmbientLight - Mike C - replaces G4 AmbientLight
10053 - GlobalCache
10054 - Visonic RF Transmitters
10056 - Anahiah RFID Receivers
10057 - Anahiah RFID Transmitters
10058 - TCP/IP Lua console interface and event interface
10059 - TTSRandomizer
10060 - Theatertek over IP (v. 2.5 and above) - Eiffel
10061 - DVBViewer (v. 3.6 and beyond, over COM interface) - Eiffel
10062 - Rotel 1055 receiver (Serial) - Eiffel
10063 - Sony VPL-VW10HT projector (Serial) - Eiffel
10064 - Lutron RadioRA
10065 - JRMC
10066 - Video Capture
10067 - XBMC Remote - NeoMorph
10070 - ANNA interface - NeoMorph
10071 - Skype plugin - crisr
10072 - Sharp TV component - Rob H
10073 - ELK Plugin - harleydude
10074 - Transport Manager - Ron
10100-10119 - PLM Insteon.
10121 - Moonphase HarleyDude
12000-13000 - For private use. Do not publish devices with these numbers.

esajesa

August 22nd, 2005, 06:00 PM

I would like to claim these:

6 - Meedio
7 - Media Player Classic

//Jens

danward79

August 23rd, 2005, 06:33 AM

Hi,

Can I please claim number 8, for my SageTV scripts

Thanks you :)

JohnHind

September 23rd, 2005, 09:14 AM

I'd like to reserve some numbers including the first TreeScript Conditionals!

Actions:

40 - Event Translation. This Action generates a new event from scratch or containing elements of the event that triggers it.

41 - Event Pump. This Action sends any event which triggers it to a remote computer running Girder with the comserv plugin.

Conditionals:

40 - Event Filter. This Conditional blocks events from ranges of Device Numbers from triggering the node to which it is attached or any child nodes.

41 - Comserv Conditional. This conditional is true if a specified Girder computer is able or is unable to receive events via the Event Pump (i.e. is online or offline).

danward79

October 5th, 2005, 03:59 PM

Hi,

Could I reserve a group of actions for my file functions, please. May I suggest 60 - 69. Unless someone else has those.

I actually only need 8 action numbers, but that would leave scope for expansion if required?

As a temporary mesure, I am using 900- 907 on my machine.

TIA
:)

Ron

October 6th, 2005, 10:39 AM

Dan - Done.

danward79

October 6th, 2005, 01:00 PM

Thanks

JohnHind

November 14th, 2005, 07:27 AM

Please reserve the following (some of this is reorganization)

Config.
40 - G2G UI.lua (Girder To Girder Configuration).

Action
40 - EventExtras.lua (Event Translation)
41 - G2G UI.lua (Remote Event Pump) - Changed name, same function.
42 - G2G UI.lua (Remote Scripting)
43 - G2G UI.lua (Remote Event)
44 - ScriptHelper.lua (File Script)

Conditional
40 - EventExtras.lua (Event Filter)
41 - G2G UI.lua (Remote Girder Conditional) - New name, same function.

Promixis

November 14th, 2005, 09:07 AM

JohnHind

December 8th, 2005, 03:17 PM

Please reserve device number 10012 for Girder2Girder.

- John

danward79

December 12th, 2005, 02:17 PM

Since Mike is about to break my arm, about email you had better reserve me a config number and action numbers for email. :)

Promixis

December 12th, 2005, 02:20 PM

Since Mike is about to break my arm, about email you had better reserve me a config number and action numbers for email. :)

:lol:

you got action 80 Send Email.

Ron

December 12th, 2005, 03:52 PM

What are you going to put in the settings dialog that is different from the already available email settings?

danward79

December 12th, 2005, 04:04 PM

Very good question, I don't need a settings dialogue.

I was going to do something!, but it was a bad idea. :oops:

Rob H

December 25th, 2005, 08:43 AM

I'd like to reserve the following for the ELK M1 :-

Plugin ID 10020
Config 50
Action 200-250 (probably won't need all of these)

Rob H

January 24th, 2006, 02:33 PM

Oh, and I need Config 51 as well.

Francois

January 24th, 2006, 02:47 PM

Would it be possible to set aside some DUI numbers for user scripts (I'm playing with a few things, some might be relevant to other people, others might not make nuch sense to share)?

Say, anything number from 1500 to 2000 is for custom application?

Finally, I'd be interested in taking a few DUI numbers for

Rotel RSX-1055 receiver (just a handful of events, so I don't mind sharing with, for instance, other Rotel equipment users)

Sony VPL-VW10HT projector (again, just a few events)

Thanks

honnt

January 28th, 2006, 12:16 AM

Promixis

January 28th, 2006, 08:23 AM

Rob H

February 1st, 2006, 06:21 AM

Can I have plugin number 10030 for Denon AV Receivers

Ron

February 2nd, 2006, 01:48 PM

Denon - Done.

honnt

February 12th, 2006, 09:39 AM

Could I get some treescript DUI numbers set aside, please?

First, for the Outlook scheduler management subsytem, I need a plugin number and 2 automation config subtypes
(I developed on 55 and 56, but can obviously change if those are reserved)...and while I don't have any yet, I can see 10-12 actions possible.

Second, for the global variable conditional, I need a single action subtype.

Thanks!

Done!

I need an Action to go along with the global variable Conditional (triggers a node based on variable value). You assigned me 101 for the Conditional, but Action 101 is taken by GlobalCache. Since I've not yet posted the Conditional, could you maybe reassign and give me a Conditional and Action with the same ID? Would seem to make sense....

Thx!

honnt

February 17th, 2006, 04:32 AM

honnt

February 22nd, 2006, 04:45 PM

Assuming you've been gone, Mike....welcome back. Any chance of getting the treescript DUI numbers situated as I asked about above?

Thx, Terry

Ron

February 22nd, 2006, 05:17 PM

Let me fix this. Hang on.

Ron

February 22nd, 2006, 05:20 PM

alright

110-125 action
110 - conditional. Is that what you wanted?

Rob H

March 7th, 2006, 03:16 AM

Plugin id 10023 for the DSC Power Series please.

hoox

March 12th, 2006, 03:30 PM

Can I have Config number 60 for the Slinke ?

Promixis

March 12th, 2006, 05:36 PM

Can I have Config number 60 for the Slinke ?

Done.

JohnHind

March 23rd, 2006, 05:29 AM

Please reserve Config. 70 - 75 for the new Scheduler UI.

Thanks, - John

Promixis

March 23rd, 2006, 07:13 AM

Please reserve Config. 70 - 75 for the new Scheduler UI.

Thanks, - John

done

Todd Reed

March 24th, 2006, 04:56 PM

Mike,

Ocelot Plugin ID = ??

Todd

Promixis

March 24th, 2006, 05:01 PM

10024

JohnHind

April 5th, 2006, 05:45 AM

Please reserve device/plugin number 10031 for the Scheduler UI.

Currently it raises events on device 235 (scheduler plugin). I am moving to this new number so the user defined events can be shown in the event selection drop-down.

Promixis

April 5th, 2006, 06:33 AM

Todd Reed

April 9th, 2006, 03:50 PM

Can we get a group of 20 for the Ocelot actions...

Promixis

April 9th, 2006, 04:01 PM

Can we get a group of 20 for the Ocelot actions...

you get 140-159

Rob H

April 15th, 2006, 11:08 AM

Can I reserve action 260 please Mike.

Promixis

April 15th, 2006, 09:05 PM

Can I reserve action 260 please Mike.

For ? and what numbers for the Elk?

Rob H

April 16th, 2006, 03:46 AM

The 260 is for a serial device script generator.

And I'm relinquishing the first 10 (ie 200-209) from the ELK range.

Todd Reed

April 16th, 2006, 10:45 AM

Also, can I get a config number for Ocelot?

Promixis

April 16th, 2006, 01:25 PM

Updated.

kurtlewis

April 16th, 2006, 03:44 PM

I would like to request reserving the next avail number in the 10000 range for Arcam AVP700 Receiver

-Kurt

Promixis

April 16th, 2006, 04:19 PM

done

mhund

April 20th, 2006, 07:07 PM

Hi,

can you give me the 100 for a LUA Expression conditional?

gbumgard

April 26th, 2006, 01:49 AM

Hey guys, I need a device ID and a block of type codes for the speech recognition plugin.

I currently have 1 config, 13 actions, and 2 conditionals.

If I add telephony support I will likely need a few more of each, though I suspect most of the telephony stuff would probably be managed in a different plugin with another device ID.

Thanks!

P.S. Is there some reason why config/action/conditionals aren't kept together within a single block of numbers?

-g.b.

Promixis

April 26th, 2006, 06:09 AM

Done!

gbumgard

April 26th, 2006, 12:57 PM

Mike,

I might have misunderstood the usage of the DUI treescript codes.

Do I need anything other than a device id if the plugin is written in C/C++ and does not implement any of the forms in Lua? Or do I still need to allocate numbers for each of the forms? If so, wouldn't I need more than one number if I have multiple action forms?

I'm definitely a little confused.

-g.b.

Ron

April 26th, 2006, 01:59 PM

If you are not implementing the DU using the treescript plugin (by putting a lua file in the plugins\treesscript directory) you don't need any other numbers just use your plugin number on any dui form you need.

gbumgard

April 26th, 2006, 02:09 PM

OK. Good. You guys can drop those treescript numbers that Mike just assigned to me.

Thanks!

-g.b.

Promixis

April 26th, 2006, 02:32 PM

OK. Good. You guys can drop those treescript numbers that Mike just assigned to me.

Thanks!

-g.b.

done ;)

mhund

April 27th, 2006, 01:44 PM

Hi,

can you give me the 100 for a LUA Expression conditional?

Is this "done" too?

Rob H

April 27th, 2006, 04:53 PM

Yes :)

As always, check the first message in this thread for the current assignments

danward79

May 21st, 2006, 08:25 AM

Could I have the next available plugin ID and a Config id for OneWire Device Manager.

Promixis

May 21st, 2006, 08:54 AM

Done

10009 and 21.

danward79

May 24th, 2006, 04:42 PM

Can I please have two conditional numbers allocated, for File and Folder exists.

Ta

Promixis

May 24th, 2006, 07:51 PM

done

see above

danward79

May 25th, 2006, 01:06 AM

done

see above

Thanks Mike

danward79

May 26th, 2006, 03:18 PM

Could I please have a conditional number allocated for OneWire Temperature Device Conditional.

and also one for a RFXCOM Conditional

danward79

May 27th, 2006, 05:36 PM

Hi,

Could I also get two conditional numbers (115 & 116) for Time and Date Conditionals please.

Also Don't forget about 113, as One Wire Temperature Conditional ;-)

Thanks

Ron

May 27th, 2006, 07:40 PM

Numbers allocated.

danward79

June 2nd, 2006, 04:12 PM

Can I please have 117 for Sunrise and Set Conditionals.

I would also like some for X10 conditionals.

118 - X10 State Conditional
119 - X10 Level Conditional

Not sure at the moment if I will need others.

Ron

June 2nd, 2006, 04:14 PM

Numbers allocated, you are on a roll Dan!

danward79

August 12th, 2006, 08:17 AM

Hi Mike / Ron

Could I get a plugin ID for my Nokia, F-Bus SMS Plugin, and also a config ID, and an Action ID please.

Plugin ID - Nokia, F-Bus SMS Plugin,
Action ID - Send SMS,
Config ID - Nokia, F-Bus SMS Plugin Configuration,

Cheers Chaps ;)

Promixis

August 14th, 2006, 01:56 PM

updated ;)

danward79

August 14th, 2006, 02:29 PM

Thanks Mike

Promixis

November 28th, 2006, 06:48 PM

Dan, you got 62 for the Nokia

danward79

November 28th, 2006, 11:54 PM

Thanks, did I miss that?

Promixis

November 29th, 2006, 11:48 AM

Thanks, did I miss that?

Nope, I did.

harleydude

January 19th, 2007, 06:37 PM

Can I get a component config id and a component id for my GirderBackup plugin?

Thanks
Rick

Promixis

January 19th, 2007, 07:42 PM

Rick,

Done.

So what does it do?

harleydude

January 19th, 2007, 07:56 PM

I have expaned my current backup script, using the zip extensions, to a component to allow for configurable backups. I had a hard drive crash a few months back and the script saved a lot of hard work.

Rick

Promixis

January 19th, 2007, 08:25 PM

Rob H

April 21st, 2007, 01:47 PM

Need a plugin ID for Visonic RF Transmitters please Mike.

Promixis

April 21st, 2007, 04:38 PM

Rob - its 200 and 10054

harleydude

June 5th, 2007, 09:29 PM

Mike,

Need a plugin ID and config ID for my TTSRandomizer plugin.

Thanks

Promixis

June 7th, 2007, 08:36 AM

Mike,

Need a plugin ID and config ID for my TTSRandomizer plugin.

Thanks

Done... what does it do?

harleydude

June 7th, 2007, 08:47 AM

Thanks.

I am using it to provide different variations of voice announcements for various things.

For CID
Look who is calling now, Harleydude
How many times is Harleydude going to call

Things like that, so that the same things are not said all the time. I am also working on weather announcements scripts as well that will use this. I am currently testing it with JohnW and will prob post it on the forums in a couple of days.

Francois

June 10th, 2007, 08:12 AM

Could I get plugin numbers for the following:

Theatertek over IP (v. 2.5 and above) - 10060?
DVBViewer (v. 3.6 and beyond, over COM interface) 10061?
Rotel 1055 receiver (Serial) - 10062?
Sony VPL-VW10HT projector (Serial) - 10063?

Thanks

Eiffel

Promixis

June 10th, 2007, 08:56 AM

harleydude

August 16th, 2007, 07:23 PM

Guys,

My POP3 component is nearing completion and am about ready to post it to the board. The plug-in id assigned was 10037 however the name has been changed to Email Manager. I was also assigned a config id of 121. I am now in need to 2 more config id's and an action id.

This component provides mechanisms for sending and receiving of email from multiple accounts and to have emails processed and commands to be executed by Girder.

Thanks

harleydude

August 28th, 2007, 07:44 AM

Any word on this???

Ron

August 28th, 2007, 03:10 PM

Sorry about the delay I have added your numbers.

Action:
290 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)

Config:
131 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)
132 - POP3 / Email Manager - harleydude (http://www.promixis.com/forums/member.php?u=6273)

NeoMorph

October 28th, 2007, 11:40 AM

Can I have a number for my XBMC Remote please... Action list only atm.

Rob H

October 28th, 2007, 01:44 PM

Action:
300 - XBMC Remote - NeoMorph

NeoMorph

October 28th, 2007, 05:03 PM

Go tell the Promixians, thou who passest by,
That here, obedient to their laws, we DUI.[ (http://en.wikipedia.org/wiki/Battle_of_Thermopylae#_note-31)

Easy enough number to remember ;)

NeoMorph

November 1st, 2007, 05:57 AM

I should have realised this but I'm going to need Config and Plugin numbers for my XBMC plugin...

I'm going to integrate XBMC commands directly into Girder now that everything is working how I expected it to (thanks Rob).

Rob H

November 1st, 2007, 07:15 AM

Config:
300 - XBMC Remote - NeoMorph

Plugin:
10067 - XBMC Remote - NeoMorph

NeoMorph

November 1st, 2007, 09:24 AM

Cheers Rob... Did you notice the misquote I posted above when you gave me the Action id code?

Rob H

November 1st, 2007, 10:30 AM

Yes, I did - but I had to follow up the reference :)

NeoMorph

November 1st, 2007, 02:22 PM

Yes, I did - but I had to follow up the reference :)

Oh dear Rob... no classical education? The reference was about the 300 Spartans who died and wanted to be remembered...

Actually I didn't realise I copied a link too... I must have grabbed it when I had to look up the exact quote so I could butcher it. :p

NeoMorph

November 3rd, 2007, 06:08 AM

I need some more ID's...

XBMC Listener
XBMC Pinger
(plus 3 more as I envision some more bits to add on shortly)

ANNA Interface (action)
ANNA Interface (config)
ANNA Interface (plugin)

ANNA stands for "Access for Network Neighbourhood Automation". It's basically my home-brew automation hardware that links Girder. I've been using Girder events up to now but I'm getting confused trawling through the Log heh.

NeoMorph

November 16th, 2007, 12:47 AM

bump...

Still awaiting those numbers Rob...

Rob H

November 16th, 2007, 05:19 AM

Action

301 - XBMC Listener - NeoMorph
302 - XBMC Pinger - NeoMorph
305 - ANNA interface - NeoMorph

Config

302 - XBMC Pinger - NeoMorph
305 - ANNA interface - NeoMorph

Plugin ID

10070 - ANNA interface - NeoMorph

Did you want config and plugin IDs for the XBMC Listener and Pinger too?

NeoMorph

November 16th, 2007, 05:32 AM

Need a config for the Pinger but not the listener as it basically listens to the multicast network and isn't tied down to to a single IP.

Rob H

November 16th, 2007, 06:09 AM

Updated my previous message with a config ID for the Pinger

NeoMorph

November 16th, 2007, 02:10 PM

Cheers Rob. I've got to admit the project has sort of Frankensteined on me... All because I decided to see if I could access my Girder 3.3 setup via the web and then got NR2... and then played with Girder5 and got hooked.

Now I have customised hardware, touchscreens and a project that's going from strength to strength.

I swear that coding with Girder/NR2 is damned addictive.

Rob H

November 16th, 2007, 02:29 PM

Tell me about it - I've just ordered the parts for my new media server - will take up to 16 SATA drives (I'm starting with 5 for 5 terabytes). I'll be moving the files from my existing servers and will be using the drives from those on this server as a stop-gap until I need to add the remaining 11 1Tb drives (or even larger).

Once that's built I'll have even more motivation to finish LDJ2.

The new server will be running Windows Home Server and will also be backing up all my PCs overnight.

NeoMorph

November 16th, 2007, 02:48 PM

*NeoMorph Falls Out Of Bed In Shock*

5TB is a lot... but 16TB is gonna be mind blowing.Mind you if you start using HD Divx format it will quickly fill up.

I'm eventually going to be going a different way. Namely using small low power NAS devices that only need to be on when I need them with only a single hard drive in each one. That will reduce the power consumption that a large server will need to run (plus will allow them to run silently). Just imagine the power requirement and noise output that your 16 hard drives will need/cause. Mind you my system couldn't handle the backups - I have my raid server for that function.

The reason I designed my system to use the power economy modular approach was when I checked my last electricity bill. I live on my own in a one bedroom flat and my last bill was nearly three times the amount of my sisters who lives in a three bedroom house... OK so I'm a gadget freak heh.

What's the wattage of your PSU btw? It's going to have to be beefy to handle all those hard drives. Oh and you will probably be able to use your new server to heat your house all winter :p

Rob H

November 16th, 2007, 03:19 PM

I'm using the new WD 'Green' power drives which use about 8.5 W max I believe. The PSU is 600W. This machine will replace a pair of RAID servers that have a 750W and a pair of 650W supplies respectively and something like 24 drives so it should save a bit of money and energy. I currently have something like 7TB of data between the two of them.

This should be the only machine that's powered on all the time - I hope to be running Girder on it too, although I'm not yet sure whether Girder will run on WHS.

NeoMorph

November 16th, 2007, 03:42 PM

My Girder/emule PC will be running on a 60W psu which is astonishing. The lowest value PSU I have currently is a 360W Enermax so it should save me quite a bit in terms of electricity usage.

I used to use all Samsung Spinpoint hard drives as they were the bees knees where quietness were concerned. When a bunch of them started to go byebye (after being on 24/7 for the last 5 years) I replaced them with WD Raid Edition ones (designed for 24/7 use) and have been pleasantly surprised with how cool and quiet they are. I currently have 3 300gb drives in that server and it's not bad but I think that having a single hard drive in a mini-itx setup is going to be better (for me at least).

Personally I'd just like to have computers that don't sound like Hoover Dam Power Station all the time. This Acer laptop I'm using (Athlon 3400+ with Geforce go5700) should be issued with ear defenders it's so noisy (fan on ALL the time because Acer screwed up the heat dissipation). If I ever get another laptop I'll make sure that I test it beforehand to make sure it's as quiet as possible. Sod uber-mega-ninja machines... they are just too darned noisy. The mini-ITX fanless machines I'm going to go for will only generate noise from the hard drive so that's going to be me searching for the quietest hard drive available. Performance isn't going to be too much of an issue as all it will be doing is serving audio and video.

Rob H

November 16th, 2007, 05:49 PM

Nice, I try to go for quiet machines myself.

crisr

November 25th, 2007, 08:07 AM

Hi, I need a plugin number and a couple of Action IDs for the Skype plugin I developed - http://www.promixis.com/forums/showthread.php?t=17699. Thanks.

Rob H

November 25th, 2007, 08:57 AM

Plugin ID

10071 - Skype plugin - crisr

Action

310 - Skype plugin - crisr
311 - Skype plugin - crisr

harleydude

April 17th, 2008, 10:15 PM

Ron/Rob

Request for Elk plug-in ID's

Plug-in: 1
Config: Will need 2 maybe 3
Action: 4 for now, but might need more later
Conditional: same as Action

Thanks

Rob H

April 18th, 2008, 02:52 AM

Here you go -

Action: 320-329 - ELK Plugin - harleydude
Conditional: 320-329 - ELK Plugin - harleydude
Config: 320-329 - ELK Plugin - harleydude
Plugin: 10073 - ELK Plugin - harleydude

Mike C

July 7th, 2008, 01:00 PM

Rob,

Insteon PLM Component is using

component 10100-10119
config 10100 - 10119
action 10120

Ron

July 7th, 2008, 01:05 PM

Numbers added to list.

harleydude

September 30th, 2008, 08:13 AM

Request a plugin and config ID for MoonPhase plugin.

Ron

September 30th, 2008, 09:11 AM

You get 10121 for both.