Upgraded from v3.20a12 to v3.20b11, ain't working anymore

[Ron]

The device numbers changed, pull your .gml file through the girder 3.1 to 3.2 convertor.

http://www.girder.nl/downloadn.php?Link=308

[Ron]

To fix your problem simply relearn the eventstrings.

Btw, did you open the mod_originalfilename.gml file ? Because the convertor writes the new file under a different name.

[Ron]

Do you still have the original file ? I'd like to have a look at it to see what is wrong with the convertor. Send it to the support address Thanks! (see girder about box )

[Ares]

Hello,

I had a nicely working Girder v3.20a12, and recently I upgraded first to beta7 and then to beta11, however I have this problem:

Girder receives IR commands correctly, the commands still work like they used to work when using "Test Command", the lamp flashes from green to orange, but Girder does not execute commands automatically anymore.

Help! :-?

Ares

[Ares]

Ron, I tried this, but unfortunately no improvement, beacuse I already had a 3.2 .gml file? (The first version I used was v3.20alpha12)

A change I noticed is in the title bar of girder. The newer versions show the name of the currently active .gml file, while alpha12 did not do this. Could this be a hint?

Ares

[Ares]

Yes, I did open the mod_originalfilename.gml
And I already found out the solution you give myself, cause when I learned new commands they worked, and when I deleted an eventstring from an old program, and relearned it, it worked. Yes!
Thanx!

Ares