Is somebody use a Pronto with Girder ?

[Ron]

You really have to tell us what kind of hardware that you are using.

[Ron]

I had the same feeling, but I tried to stay polite ;-) He actually asked again in this thread :

http://www.girder.nl/phpBB2/viewtopic.php?t=1793

[Ron]

http://www.girder.nl/help/faq.php#202

[oe1k]

To elaborate on your problem:
iRDA is ify at best. I'm amazed that it works reliably with your other remotes. Obviously it doesn't mesh with your Pronto.
You need a IRMAN/UIR, or just get a new UIRT.
-Richard

[Wykat]

I think he tries to use the IRDA receiver. Don't think that will work, but I don't have a Pronto either. Many people on the avsforum are using it with Girder.

Wykat

[PrFalken]

Hi there

I am using a pronto with girder.
Can anyone here give me the config of the serial port on the pc for the ir
speed parity ...
Then parameters set in girder.

My problem is that with the pronto I never have the same code receive on the PC !!!

Thanks for your help

[PrFalken]

Hi there

Thanks for your answers.
My problem is that with a standar remote control as the one of my TV, VCR it works great but when I am using my pronto, the code received in girder is never the same...

At the begining I was thinking that it could be a speed parameter of my irda hard and plugin but I am not sure now.

[PrFalken]

Thanks for your help.
It works great with other remotes and also with the pronto now...

It was really a the speed parameter !!! With the pronto I can't keep 4800
I've set my com prt to 600 and it works now.

Sorry for my question here on a Irda plugin not supported.

Bye

[DocSavage]

I am using the pronto with an IrMan receiver and have had great sucess...
There is nothing that you have to do - if your ir receiver is working correctly