harleydude
February 24th, 2009, 03:49 PM
From Elk's website.
Feb 23, 2009 - M1 new application firmware (4.5.14 and 5.1.14)
This new Firmware requires Bootware 3.3.2
* * ElkRP Software 1.6.16 or later is required for this new firmware * *
Changes effective with this new firmware:
1. Added new ASCII command “EE” which provides an indication when entry/exit time starts and expires.
2. Resolved an issue with autostay (auto interior off) not operating when a force arm zone is programmed.
3. Resolved an issue that could cause a chime tone if the star key was pressed while a zone was violated.
4. Added additional 250ms of time between the 2-way listen mics being turned off and the audio amp being turned on.
5. Resolved an issue with lighting and the Universal Devices ISY26/99 expanded time variable.
6. Added new ASCII commands “CA” and “CD” for future control of specific brands whole house audio using rules.
7. Resolved an issue with Duress activation when triggered from a touchscreen or the ASCII command strings.
8. Increased the talk back volume during a 2-way listen session.
9. Enhanced the ASCII comand “ZS” with the addition of wireless transmitter lost supervisory and low battery.
10. Added capability to communicate ASCII commands to an HAI Omnistat 2 thermostat.
11. Increased the time delay before start of missing expander module annunciation.
12. Resolved an issue with rules trigger based on an X10 signal (command) coming from an external source or the M1.
13. Resolved a problem with the display of hex data on keypad menu 8 - 6. Fixed Data Bus Type 3 and 5 not correctly
displaying missing modules.
Let me know if anyone is interested in the new features.
Feb 23, 2009 - M1 new application firmware (4.5.14 and 5.1.14)
This new Firmware requires Bootware 3.3.2
* * ElkRP Software 1.6.16 or later is required for this new firmware * *
Changes effective with this new firmware:
1. Added new ASCII command “EE” which provides an indication when entry/exit time starts and expires.
2. Resolved an issue with autostay (auto interior off) not operating when a force arm zone is programmed.
3. Resolved an issue that could cause a chime tone if the star key was pressed while a zone was violated.
4. Added additional 250ms of time between the 2-way listen mics being turned off and the audio amp being turned on.
5. Resolved an issue with lighting and the Universal Devices ISY26/99 expanded time variable.
6. Added new ASCII commands “CA” and “CD” for future control of specific brands whole house audio using rules.
7. Resolved an issue with Duress activation when triggered from a touchscreen or the ASCII command strings.
8. Increased the talk back volume during a 2-way listen session.
9. Enhanced the ASCII comand “ZS” with the addition of wireless transmitter lost supervisory and low battery.
10. Added capability to communicate ASCII commands to an HAI Omnistat 2 thermostat.
11. Increased the time delay before start of missing expander module annunciation.
12. Resolved an issue with rules trigger based on an X10 signal (command) coming from an external source or the M1.
13. Resolved a problem with the display of hex data on keypad menu 8 - 6. Fixed Data Bus Type 3 and 5 not correctly
displaying missing modules.
Let me know if anyone is interested in the new features.