Codes of button are not displayed

[lopo]

:(
Hello,

I have following problem:
(configuration: ATI Remote Wonder, drivers 1.2, plugin GIRDER enabled, Girder 3.2.4, ATI wonder plugin 1.1 - tested on Win 98 and Win ME)

Startup is proccessing correctly - RW works - the mouse cursor is moving according to buttons (hw shall be OK). But when the main window of Girder is opened (the green button is shown), and I tried to Capture any buttons, no code is displayed. I tested nearly all buttons but no response was shown.

Can anybody help? I tried to search forums, but I have not found this problem. IMHO shall be be problem with Win98/Me, because with same software installation files it worked win Win2k.

Thanks for any advice

Lopo

[Mark F]

I'm not sure what is wrong but here are a couple of things to try:

With Girder as the foreground window, press F9. Does the green button turn blue? Press F9 again. Is it green again?

Go to the general tab on the settings page. Is the "Don't send the IR commands when Girder is the Foreground window" checked?

[lopo]

I'm not sure what is wrong but here are a couple of things to try:

With Girder as the foreground window, press F9. Does the green button turn blue? Press F9 again. Is it green again?

Go to the general tab on the settings page. Is the "Don't send the IR commands when Girder is the Foreground window" checked?

Good idea. I tried it with following result:

1. When the 'Auto Enable' option is checked in the preferences, Girder starts with GREEN button, after pressing F9 is is changed to BLUE color and after next F9 the application is hard-locked.

2. When the 'Auto Enable' option is NOT checked in the preferences, Girder starts with BLUE button, after pressing F9 is is changed to GREEN color and after next F9 it changed to BLUE and next F9 made the application hard-locked.

IMHO - communication between DLL plugins Remote and Girder is not correct, but I don't know how to diagnostic it and solve it.

[Mark F]

I believe progress is being made. ;)

Try moving all the plugins to a different directory and adding them back one at a time. Do the same F9-F9 thing until you find the one causing problems.

Another possibility is that the Girder .exe file is corrupted. This is highly unlikely; but, you might try downloading and installing again.

[lopo]

I believe progress is being made. ;)

Try moving all the plugins to a different directory and adding them back one at a time. Do the same F9-F9 thing until you find the one causing problems.

Another possibility is that the Girder .exe file is corrupted. This is highly unlikely; but, you might try downloading and installing again.

A can try, but I'm afraid that it is not solution - I have only one checked plug-in 'Remote Wonder' others are disabled.

Reinstalling is possible, but from same installation files I tested on system with Win2k and worked correctly.

[Mark F]

I concur with your previous assessment, the remote wonder plugin is broken. Contact the author with specifics.