Avermedia remote problem

[Ron]

The .CPP file is the source code of the plugin, that means that is the file that the author of the plugin wrote. With a compiler you can make a .dll of it. ( a little experience is needed)

I didn´t hear this problem yet,... it sounds like Girder is messing up, but i have no explanation for this,.. its just a timer that disables the led to green again.... i´m puzzled.

Ron

[Ron]

I'll give it a quick peek.

-Ron

[Ron]

I think people would be interested in the fix. Could you let me know what you did, or send me the source ?

(ron@girder.nl)

[Ron]

vu1tur sent me the updated plugin with the message that the fix only worked for a few times. So you probably don't want it.

[mmoalem]

hi there all
just installed my new avermedia tv98capture and also had some problems with the video side the remote wors fine.
than installed girder and the avermedia plugin and got a little problem: when i press one button (one of half of them) on the remote the light on the girder turns from green to blinking yellow and stays like it (it's like the off command isnt sent) and the other half of the buttons turn the blinking yellow to green again (it's like half turn on transmission and half turn them off) - anyone with a solution?
in the zip of the plug in there is a file with cpp extension - wht is it excactly? can i fix the problem through it?
any insight will be great as i'm completly lost here
email me if you can
cheers
michel

[mmoalem]

hi there Ron and thanks for the reply - not really a programmer myself so cant make any sense of the cpp file but i suspect the solution is in there somewhere
it goes like this: there are 4 columns of buttons on the remote and all buttons in the first and third column turn the green light into blinking yellow and all the the ones in the 2nd and 4th columns turn it back into green - not sure about it but my logic tells me that the problem is not with the turn off timer of girder (as it would affect all buttons) but with the hardware pugin definitions - wish i could make sense of the cpp file but cant maybe you could have a quick look at it and see if you can spot anything to that extent (hope i'm not asking too much...)
cheers
michel

[vu1tur]

I have TVphone98, and there's no button on remote which stops the yellow light flashing.
That is under W2K. In Win98 everything is normal.

[vu1tur]

Just found out.
It's neither Girder's nor plugin's problem. Cause btTool by Borg shows that the button is pressed but never released. Obviously it's crappy drivers Avermedia released.

[vu1tur]

Sorry. That is plugin's problem :smile:
bRemore2.0 works right in W2K

[vu1tur]

Yo,

Finally I fixed AverMedia plugin.
Tested on AverMedia TVPhone98, W2K.

Drop a line if you need one, I'll
mail it to u.

[vu1tur]

Hehe, I wish I knew what I did :smile:))
I've mailed it to ya...

[vu1tur]

I rewrote the plugin. Now it should work.
But you know, I had the same problem in W98 too.

[vu1tur]

released AverMedia plugin 1.1.1
fixed a couple of bugs

[vu1tur]

what kind of avermedia card you have?

[vu1tur]

oh, OK, by Pavel Chromy I suppose.

[senergy]

hi, im new to this, but i spend 3 hours trying to get girder working with my avermedia studio card, i am having the same problem that has been mentioned in this thread. seems the remote continues to send the same command until a stop command is sent (for me its the number 8 key) and im using winxp. can i get a copy of the plug in please!!
senergy@optusnet.com.au

p.s. great program!!!!!!!

[senergy]

damm, o well. ill have to install win98 then, until the updated patch comes out.

[senergy]

i tried your updated driver, still have the same prob where the button pressed is constantly repeated. this is under xp though

[senergy]

i have the avermedia studio, part of the avermedia tvphone series.
there is hope i belive, im currently beta testing new drivers that were so kindly posted to me.
to be fully released soon i hope.

[habanr]

Hi!
Has anybody already successfuly solved the problem with Girder, AverTV and it's remote controller. Last week I have bought this card and I have the same problem with controller as 'mmoalem' from 2001-05-14 in this discusion. I'm using new original Avermedia drivers ver 3.14. As Gider hardware plugin I tried to use plugins written by Kostya Dmitriev and also Michal Milczewski. None of them works correctly with AVerTV. Girder detects IR commands only from buttons located in the 1st and 2nd columns of the remote - the others have no efect. Thank for help. Radek

[habanr]

Correction to my previous message:
Girder detects IR commands only from buttons located in the 1st and 3nd columns of the remote. Thanks Radek

[mac]

I'm gonna release for AverMedia TVStudio, wchich solves the problem described aboven soon. Pavel

[Ivanpiro]

:cry:

I'm trying to use the Avertv remote to control my Avertv tuner using ShowShifter. Where can I find the Avertv plugins?

I thought I saw them yesterday in t download section. Today they are not there.

Please help,

Ivan