Have you a solution for delay Girder -> Progdvb ?

[meckey]

my remote control has 40 keys and I have programmed for everyone the specific channel with the switch "/ch: N.Channel" in Girder.
however there is a delay of 2 second ones in order to change channel in progdvb.
I would want to directly use this switch "/ch" in progdvb in order changing channel without delay.
In progdvb switch "/ch" in the module "Settings -> Controls" but I can only insert one switch /ch and not 40 (every key of the remote control -> a n.channel).
how I can make only using "Controls" in progdvb?
or using girder, exists a trick in order to avoid the delay?

Thanks

[jwhavican]

Well I'm not exactly clear on what you are trying to do but it sounds like you want to send a channel based on which button is pushed to progdvb but you want to get rid of the delay. Im not sure how progdvb works but what it sounds like you can do is pass the /ch as an argument when executing progdvb through girder.

For example make a command in girder OS -> Execute
Then for File put progdvb.exe or whatever the exe is called
Then for the step size use the /ch switch

Also instead of using each button on the remote for one channel, you might want to use the numbuilder plugin and just use 10 buttons instead of 40 to change to any channel. But this is just a suggestion, I don't know how you want it to work. I hope this helps, good luck :)

Jared

[meckey]

thanks,
yes i use OS -> Execute for everyone of the 40 keys
key 1 -> Execute channel 1140
key 2 -> Execute channel 1120
.
.
.

but Progdvb delay 2 seconds for change channel to 1120 after that I have pressed on the remote control key 2
(i use TSOP1738 Ir receiver, Kenwood rc-56 remote control, winlirc, girder and Progdvb)



i don't know to use numbuilder plugin ... it avoid the delay?
With numbuilder plugin i can use only 10 keys for change to ALL channel but I am interested to avoid the delay


if in Progdvb i use Settings -> Controls
/Mute
/Set channel list
.
.
.
use only winlirc, no girder and there isn't delay
but what i do to use /CH in progdvb for all my favorites channel (and therefore to avoid the delay)?


if i use in girder /CH:[channelbuilder] it avoids delay?
which commands I must use?

[jwhavican]

Well, I've never used progdvb so I really have no other ideas, sorry. The numbuilder plugin wouldnt help get rid of your delay, it would only allow you to create a channel number for example 1147 by pressing the buttons 1, 1, 4, 7 on your remote, that way you wouldnt need to use all 40 buttons just to switch channels, you would only need to use 10 (0-9). But this isnt going to fix the problem you are having, I wish I could help more.

Jared

[meckey]

thanks same :D
rgds

[Bitmonster]

You can try to use keyboard actions to send the channel numbers to ProgDVB and complete the input with an "Enter" key. The problem seems to be, that ProgDVB waits for additional keys to complete the number like many TVs and settop-boxes do.