PDA

View Full Version : Detection of Mouse Movement


Gaudi
November 7th, 2003, 03:38 PM
Is there any way to detect the movement of the mouse as an event?
What i would like to do is use the mousepad on my ATI Remote as additional buttons. Is this possible?
miked
November 8th, 2003, 12:00 AM
A way around this is to disable the driver for your remote control -- or disconnect the ir receiver that plugs into the mouse port -- and then just use a different ir receiver to detect the button presses on your remote control.
Promixis
November 8th, 2003, 02:34 AM
If you search here I think you will find a way to make you ATI remote work like a mouse pad and use the buttons. There is a plugin for the ati remote under x10.
tinnitus68
November 8th, 2003, 02:55 AM
Is there any way to detect the movement of the mouse as an event?
What i would like to do is use the mousepad on my ATI Remote as additional buttons. Is this possible?

You need the X10 plugin: http://www.girder.nl/downloadn.php?Link=450
This plugin makes Girder recieve all the buttons from the Remote Wonder :D

You should also get the eventstring file generated by bitmonster (i think).
This file has all the remote events for the X10/ATI remote wonder, allready learned so you can just copy/paste them to the command where you need it.
The file includes events for pressing down, repeat and up, so you can use it to make funktions like FF/Next in the same button.
I couldn't find it here in the forum right now but i will mail you a sample if you want me to.

Hope this helps
Cheers Heine
Gaudi
November 8th, 2003, 06:41 AM
Thanks Guys

The X10 Pluginn will works. Im not sure how to get the mouse going again, but i think there is information on it in this forum.

Girder is lots of Fun and made this ATI Remote from limited to great


Thanks Again.
Bitmonster
November 8th, 2003, 08:27 AM
The X10 Pluginn will works. Im not sure how to get the mouse going again, but i think there is information on it in this forum.
One way of doing it is here:
http://www.girder.nl/phpBB2/viewtopic.php?t=4038

And some additional information here:
http://www.girder.nl/phpBB2/viewtopic.php?t=4376
Gaudi
November 8th, 2003, 10:19 AM
I read these links, but i can't figure out how to get the .GML file


Thanks again
Bitmonster
November 8th, 2003, 10:23 AM
It's in the first thread: http://bitmonster.com/girder/Bitmonster_Mouse_v.1.0.GML
Gaudi
November 8th, 2003, 11:07 AM
I got it. First i just couln't figure out how to get it onto my computer

Sorry :oops:

It works very good.