PDA

View Full Version : Problem with Winfast2000 Deluxe plugin


swidry
March 10th, 2004, 02:04 AM
When Girder starts and loads Winfast 2000 Xp Deluxe plugins it says that the plugin is too old and not compatible with Girder's version. But the it works properly. Can this message be turned off? It's annoying especially if you have Girder in startup.
Promixis
March 10th, 2004, 06:29 AM
What version of Girder are you using?
swidry
March 11th, 2004, 12:13 AM
I tried both 3.24 and 3.31b

The message says (dont remebr excatly I'm in work now):
"cannot find all required exports"
but then it works
Promixis
March 11th, 2004, 04:16 AM
I don't have the hardware so I am guessing you maybe missing some of the installation files from the card..? Anyone?
swidry
March 11th, 2004, 09:52 PM
I reinstalled drivers and other soft and the problem still exits.

in Girder 3.2.4 the message is "unable to find all reuired exports"
in Girder 3.3.1b it is "plugin version too old etc"
Spampunk
March 11th, 2004, 11:39 PM
Hi swidry,

you use a Winfast TV 2000 deluxe don't you? Can you report similar problem as I have?

Please once read this (http://www.girder.nl/phpBB2/viewtopic.php?t=6417) thread and tell me your experiences.

Thank you in advance,

spampunk
swidry
March 12th, 2004, 09:43 PM
Hi Spampunk

I have Winfast 2000 Deluxe but I haven't encounter such a problem. All the keys on the remote control work properly. Oh there is one exception (but I think that it is normal): when in systray is original Winfast launcher, the Power key message is not sent to Girder but to the launcher.
Spampunk
March 31st, 2004, 04:25 AM
swidry, unfortunatly I can't make it work properly. Maybe I need some more help.

By now I have installed the latest drivers for the Winfast 2000 Deluxe. But e.g. pressing "1" and "TimeShifting" creates both code 28. As well as "Fullscreen" and "Play" results both code 18.

The authors of this plugin mention in their info-box (press "settings" after highlighted winfast 2000 plugin) that the dTV driver has to be installed. Any idea what it means?

I've got the PAL-Version of Winfast because I live in Germany. My remote is called "CoolCommand" with product number Y0400046.

I'd be really happy if you or someone else could help me.
Spampunk
March 31st, 2004, 05:09 AM
O.k. After searching and reading almost the whole forum :wink: I finally got the solution!

There two versions of the Winfast 2000 plugin. Only one is usable with the 41 button remote control.

For all of you guys with the same probs - here's the link:

Winfast 2000 Plugin (http://www.girder.nl/downloadn.php?Link=445)

But thanks to you, swidry, anyway! :lol: