UIRT parts list

[tr4veler]

For thouse of us with no parts bin to get the basics from. I'm putting together a parts list to build the UIRT (10mhz) 100% ordered out of newark. Here's what I've got so far. Could someone check this over and tell me what I screwed up missed better/cheaper parts that should be here instead. I understand the convienence of going through radioshack but I think this will provide a nice soft intro to the options for people like me who don't do this often, but are interested in projects like this (LCD's, etc).

Missing are the jumper block for thouse of us without a good place to steal one from, the proto(?) board to build it on, the solid core wire to make traces with, sodering iron and soder.



Parts list from newark.com:

Newark # Price Description
------- - ----- -----------------------------
12C1942 1 5.02 PIC 20pin through hole mount
95B4865 1 1.36 IR receiver
95B4858 2 0.35 IR-LED [need 2]
06F1739 1 0.19 Transistor
95B4971 3 0.02 signal diode [need 3]
09F4064 1 0.07 500mW 5.1V zener diode
09F4128 1 0.29 500mW 13V zener diode
18C1529 1 0.46 10MHz crystal [2wire type]
84N2432 1 0.03 4.7k 1/4w carbon film resistor 5%
84N2324 1 0.03 10ohm 1/4w carbon film resistor 5%
84n2338 1 0.03 150ohm 1/4w carbon film resistor 5%
84N2322 1 0.03 10k 1/4w carbon film resistor 5%
19C6263 1 1.59 100uF 10V tantalum electrolytic capacitor
02C1469 1 2.05 female DB9 metal hood



<font size=-1>[ This Message was edited by: tr4veler on 2002-01-11 01:17 ]</font>

<font size=-1>[ This Message was edited by: tr4veler on 2002-01-11 01:18 ]</font>