December 13th, 2005, 03:53 PM
SendMessage and Meedio not working
I am unable to communicate with Meedio via a newly created SendMessage action.
Have tried with Command Capture, Command, Sys Command, App Command, etc. and nothing works.
I can, however, import a 3.3 GML and use the created "Command - [Legacy]" action.
When editing/viewing the imported item both the WPARAM and LPARAM fields show as empty -- but the command works!
(I do have the H2-WM-COMMAND, etc. configured correctly...)
December 24th, 2005, 06:32 AM
Girder 4.0 Sendmessage to Meedio problem
I had the exact same problem. I wonder why loading a G3 gml works, but it is viewed weird like you said.
I found out that this will help:
Use 'Command Capture' from Girder 4.0.
Put 273 in Message box. For the WParam put the number of the input action (this number can be found in Meedio Configuration, under the input tab. Each action has a corresponding number to the left of the name, in grey).
Makes sure the 'Window Picker / Target Window' has only these exact settings.
I'm not sure if the 'Message' value of 273 is specific to me. I found that out by loading a working 3.3 GML, assigning an event/remote control press, then working with 'Automatic Capture' In 'Capture Settings' to find the values.
Thanks to bglass in this post: http://meedio.com/forum/about22242.html for a Girder how to.
December 24th, 2005, 09:26 AM
If someone has a working Meedio GML would you please upload it here or to the deveoper/upload area of the website?
December 24th, 2005, 12:12 PM
Could this be similar to the problem I had Mike with sagetv?
December 24th, 2005, 12:19 PM
December 24th, 2005, 09:51 PM
I wonder :x
Lets wait until Ron is back.
January 3rd, 2006, 05:40 AM
Re: Girder 4.0 Sendmessage to Meedio problem
Yup! That did it. What a nice New Year's present.
Originally Posted by ceevee
(Now off to my gml)