DM and Insteon

[hjc3hjc3]

***The tick box on the device manager that says "Do not use this device" does not maintain its state after restarting G5.***
***Update - it works now with 508 ***

I assumed this would be used to eliminate duplicate appearances on the NR Lighting screen when 2 or more switches are used to operate one light.

It does remove the second occurence from the NR screen, but after a restart of G5 it reappears.

Secondly I am having very little luck getting On/Off switches to work from NR. The sliders are beautiful, and do a great job, but the On/Off are inconsistent. If I can narrow it down to more specifics, I'll let you know.

Howard

[Promixis]

***The tick box on the device manager that says "Do not use this device" does not maintain its state after restarting G5.***
***Update - it works now with 508 ***

I assumed this would be used to eliminate duplicate appearances on the NR Lighting screen when 2 or more switches are used to operate one light.

It does remove the second occurence from the NR screen, but after a restart of G5 it reappears.

Secondly I am having very little luck getting On/Off switches to work from NR. The sliders are beautiful, and do a great job, but the On/Off are inconsistent. If I can narrow it down to more specifics, I'll let you know.

Howard

Keep me posted on this, especially with the log output.

[Ron]

I've noticed the inconsitencies with toggles as well.

[hjc3hjc3]

Keep me posted on this, especially with the log output.

Here is the log after starting NR on second machine. This is after I have tried to use several On/Off switches thru NR

Registering NR client from 192.168.1.150:3947
Direct send
*** Sending device descriptions to NetRemote@447fdf64-4661-4f4c-9554-57e90dab36fc
*** Sent
LOG: Device Manager : 4 - Connection manager: Got a DM.Query from NetRemote client at 192.168.1.150
*** Sending device descriptions to NetRemote@447fdf64-4661-4f4c-9554-57e90dab36fc
*** Sent
No pending transaction for 447fdf64-4661-4f4c-9554-57e90dab36fc

Howard

[hjc3hjc3]

If I change the state of the light using NR2 on the same machine running G5, it works and ALSO updates the state on NR2 on the second machine. It still doesn't change anything if I try to change the state on the remote machine.

Howard