not all insteon devices are exported to the Device Manager

[hjc3hjc3]

Running NR on the Girder machine, none of my Insteon Devices show up.

Running NR on my laptop remotely, about 1/2 of my Insteon Devices show up.

[Ron]

if you add a Device Manager->Lighting->Lighting action, do you see all your lights in that?

[hjc3hjc3]

if you add a Device Manager->Lighting->Lighting action, do you see all your lights in that?

I see 15 out of maybe 40.
Howard

[Ron]

to be clear. Even inside Girder you don't see all lights? Are those all dimmable lights? do you see all lights inside the Insteon Device Manager? If so do they all have a model number inside the Insteon Device Manager?

[hjc3hjc3]

to be clear. Even inside Girder you don't see all lights? Are those all dimmable lights? do you see all lights inside the Insteon Device Manager? If so do they all have a model number inside the Insteon Device Manager?

I am looking inside Girder.

The lights are a mixture of dimmable and non-dimmable.

they all show up in the Insteon Device Manager.

when you say model # I assume you mean the xx.xx.xx id. yes, they all have that.

[Ron]

not the xx.xx.xx, that's the id.

The Model number is in the Insteon Device Manager, on the Device Manager tab. Selecting all the devices you should see their model # or description at the top of the dialog. Make sure they all have their model #. Insteon will not export the device to the Device Manager if it cannot retrieve the model number.

[hjc3hjc3]

They all show one of the following:

ICON Dimmer Switch
ICON Relay Switch
ToggleLinc Relay
ToggleLinc Dimmer
PowerLinc Controller

None have any numbers in that field

[Ron]

I've moved this to it's own thread and pinged Mike to see if he has any ideas.

[hjc3hjc3]

On further investigation, I have noted that the only devices missing are the ICON Relay Switches. The one ToggleLinc Relay I have shows up. All of the others appear to be there.

N ot sure why the Icon Relays aren't making it, but maybe that helps.
Howard

EDIT: The devices that don't show up have a type of Appliance/Switch in the Device Manager. when I use the functionality to change their type to Light/Switch, they now appear in NR.

[Promixis]

Ok, so its working now?