Transport confusion

[farbs]

Ok Guys I'm trying to understand how this new transport thingy works.
I've got connected to rotel receiver.
I'm using tutorial 4, in transport manager it says it's connected (Port 1)
Connected via serial.
I started a new gml, transport actions, transport send, selected tutorial 4, entered FE 03 C5 10 4A 22 which is off for my receiver and nothing.
Am I doing it all wrong.

here a snippet out of the console

C:Program FilesPromixisGirder5luascriptComponentManager.lua:228 in function <C:Program FilesPromixisGirder5luascriptComponentManager.lua:227>
LOG: Rotel 1056 : 4  -  No response to last send 
{ -- #0
   [1] = 2,
   [2] = "
",
   [3] = 1000,
   [4] = function,
} -- #0
SEND 46 45 20 30 33 20 43 35 20 31 30 20 34 41 20 32 32 0D    FE 03 C5 10 4A 22
LOG: My Simple Example Tutorial 4 : 4  -  No response to last send 
SEND 31 30 20 34 41 20 32 32 0D    10 4A 22
LOG: My Simple Example Tutorial 4 : 4  -  No response to last send 

Here is the serial protocol for the receiver.

Please help a not so newbie

[farbs]

Changed ascii to hex and thiss is what I'm getting in the console:

SEND 0D    
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 
SEND FE 03 C5 10 4B 23 0D    þÅK#
LOG: My Simple Example Tutorial 4 : 4  -  No response to last send 
SEND FE 03 C5 10 4B 23 0D    þÅK#
LOG: My Simple Example Tutorial 4 : 4  -  No response to last send 
SEND FE 03 C5 10 4B 23 0D    þÅK#
LOG: My Simple Example Tutorial 4 : 4  -  OnQueueFull: 1 

[harleydude]

Bring up the tutorial4.lua file in an text editor or whatever you are using for editing lua files.

Change

    OnBuildCommand = function (self, data )
        return data ..'\r'
    end,

to

    OnBuildCommand = function (self, data )
        return data
    end,

Looks like your device does not want to see anything other than the command.

[farbs]

Thanks
I also change Baud to 19200 qnd that seems to have done the trick.
Now what i would like to do is display the state in NR eg, hwther it is on or off, volume, etc.
Can it be done and how??
Sorry , but I really don't know anything about programming.

[harleydude]

Before you get moving to far on changing the tutorial4.lua file, add the following file to the Girder5\luascript\transport\devices folder. I assume that if you do a install of Girder that file will be overwritten by the installer. Don't want that to happen. Restart G and setup your Transport device with this file.

Hopefully this will also provide us with some additional data in the lua console.

[Solosid]

Hi Rick,

I'm building a lua for my Teac AG-980...so I'm following this tread with interest

one question from is how do you select the lua when you rename it?


cheers

Mark

[harleydude]

Mark,

A little more involved than just changing the filename. I am sure that Ron will correct me if I am wrong.

module directive is listed towards the top of the file, the name after the last . needs to match the filename.

module("transport.devices.tutorial4")

to

module("transport.devices.RotelRSX1056")

Down in the Object declaration you need to change the Name and Description fields to match your driver. Nothing special about them, but the Name must be unique. The Name field is what is displayed in the Transport Manager screen next to the Add button.

Hope that helps.

[Solosid]

Hi Rick,

I don't want to jump in on Farbs thread so i will upload my lua on my thread

cheers

Mark

[farbs]

In the words of Crowded House "Now we're getting somewhere"

Ok, here is what shows up in the console:

My Rotel RSX1056 Transport Received: 
"
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 00 18 00 00 C9Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 60 18 00 FC 25Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
RECEIVE 05 10 02 1A
My Rotel RSX1056 Transport Received: 
RECEIVE 05 10 03 1B
My Rotel RSX1056 Transport Received: 
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 60 08 00 FC 15Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
SEND FE 03 C5 10 4A 22    þÅJ"
RECEIVE 05 10 04 1C
My Rotel RSX1056 Transport Received: 
RECEIVE 05 10 05 1D
My Rotel RSX1056 Transport Received: 
RECEIVE C5 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 04Å 
My Rotel RSX1056 Transport Received: Å 
SEND FE 03 C5 10 4B 23    þÅK#
RECEIVE 05 10 02 1A
My Rotel RSX1056 Transport Received: 
RECEIVE 05 10 0A 22
"
My Rotel RSX1056 Transport Received: 
"
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 00 18 00 00 C9Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 60 18 00 FC 25Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
RECEIVE 05 10 02 1A
My Rotel RSX1056 Transport Received: 
RECEIVE 05 10 03 1B
My Rotel RSX1056 Transport Received: 
RECEIVE C5 20 56 49 44 45 4F 20 35 20 20 20 34 35 20 00 00 00 00 60 08 00 FC 15Å VIDEO 5   45 
My Rotel RSX1056 Transport Received: Å VIDEO 5   45 
SEND FE 03 C5 10 05 DD    þÅÝ
RECEIVE 05 10 06 1E
My Rotel RSX1056 Transport Received: 
RECEIVE 05 10 02 1A
My Rotel RSX1056 Transport Received: 
RECEIVE C5 20 44 56 44 20 20 20 20 20 20 20 34 35 20 00 00 00 00 00 08 00 FC 47Å DVD       45 
My Rotel RSX1056 Transport Received: Å DVD       45 
RECEIVE C5 20 44 56 44 20 20 20 20 20 20 20 34 35 20 00 00 00 00 60 08 00 FC A7Å DVD       45 
My Rotel RSX1056 Transport Received: Å DVD       45 

DVD being what input and 45 being volume.
It's basically what shows up on the receiver.

[Solosid]

Hi Farbs,

Are you changing channels yet?

because if you are there's hope for me...

have you sorted the NR designer buttons yet...


Mark