Results 1 to 8 of 8

Thread: Girder will not read remotes

  1. March 23rd, 2009, 06:46 PM #1
    Dave.Cox
    Dave.Cox is offline Junior Member Newbie
    Join Date
    Mar 2009
    Posts
    5

    Default Girder will not read remotes

    Ok, I'm new to Girder, but it shouldn't be this difficult. If I use Add input remote wizard, everything works just fine. If I use the Add Output remote wizard, nothing happens in the wizard, although I can see the little yellow indicator flash when I press the remote button. What am I doing wrong?

    Dave
    Reply With Quote Reply With Quote
  2. March 25th, 2009, 05:47 PM #2
    Dave.Cox
    Dave.Cox is offline Junior Member Newbie
    Join Date
    Mar 2009
    Posts
    5

    Default

    No one?

    Considering I paid for a license for this, I don't think a little support is out of reason.
    Reply With Quote Reply With Quote
  3. March 25th, 2009, 06:40 PM #3
    Rob H's Avatar
    Rob H
    Rob H is offline Senior Member Promixis Team
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    Sorry, must have missed this one.

    What IR receiver/transmitter are you using?
    --Rob
    Reply With Quote Reply With Quote
  4. March 25th, 2009, 10:31 PM #4
    Dave.Cox
    Dave.Cox is offline Junior Member Newbie
    Join Date
    Mar 2009
    Posts
    5

    Default

    Thank you for getting back to me Rob. I am using the Home Electronics Tira-2.

    Dave.
    Reply With Quote Reply With Quote
  5. March 26th, 2009, 04:29 AM #5
    Rob H's Avatar
    Rob H
    Rob H is offline Senior Member Promixis Team
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    Oh dear, that's not good. We've had lots of trouble with that device. Search here for details.

    I'm fairly sure that the wizard you're trying to use doesn't support that device, but Ron's really the man to answer this. He's on his way to Hawaii today though, but should be back online in the next couple of days.
    --Rob
    Reply With Quote Reply With Quote
  6. March 26th, 2009, 05:49 PM #6
    Dave.Cox
    Dave.Cox is offline Junior Member Newbie
    Join Date
    Mar 2009
    Posts
    5

    Default

    Hmmm, that's interesting. I assumed since it was an USB-UIRT, it should work. Which device do you recommend?

    Dave
    Reply With Quote Reply With Quote
  7. March 27th, 2009, 04:19 AM #7
    Rob H's Avatar
    Rob H
    Rob H is offline Senior Member Promixis Team
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    Ah, there's some confusion here, the Tira 2 is a USB connected IR device, but it is not a USB-UIRT.

    The USB-UIRT is a specific piece of hardware available from www.usbuirt.com and is the main IR device we recommend. There's also the IRTrans range from www.irtrans.com
    --Rob
    Reply With Quote Reply With Quote
  8. March 27th, 2009, 05:28 PM #8
    Dave.Cox
    Dave.Cox is offline Junior Member Newbie
    Join Date
    Mar 2009
    Posts
    5

    Default

    Interesting. Those devices look very similar. I thought I had the correct device. Thanks for the information. The correct device has been ordered.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules