PDA

View Full Version : Transmit IR Code From PC Keyboard



Wayne9
June 1st, 2005, 08:04 PM
Just getting started with Girder. Have USBURIT up and working. Have captured IR command but cannot figure out how to transmit IR command from PC with keyboard.

Any assistive is appreciated.

Thanks..

blyons
June 4th, 2005, 12:53 AM
I can sympathize; it wasn't more than a few weeks ago I was in the same place. Sometimes the manuals are difficult to understand without simplified examples. I tend to learn best by seeing examples. Hopefully this one will help you.

First, enable the Keyboard and UIRT plugins under Settings.
Second, create a command, chosing the UIRT plugin, record the IR code, and test it with your device to be sure it works.
Third, set the event type to All, and click Learn Event, then press the desired key combination.

The next time you press that key combination it should output the IR code.

Its that simple. I hope that gets you on your way.

bl

Wayne9
June 4th, 2005, 10:05 AM
Thanks ....it worked. I really appreciate your help. Hopefully one day I'll have enough skills to help someoone. Thanks again.

WB