View Full Version : Displaced input string in the Generic Serial plug in

October 10th, 2005, 08:23 AM
I have a Lintronic device connected to the Girder 3.3 using the generic serial plug in. The Lintronic device transmits an 18 character string, like this one:


but in some cases (Not all) Girder displaces the string:


If this happens all inputs from then on are displaced and the only way I can reset this is to open the generic serial settings dialog and apply settings once more.

This is probably because the buffer isn't empty or some wrong setting in the serial plug in.
In my settinhs I have disabled all scripts, set a fixed input of 18 characters and set buffersize to 72.

I hope someone might have an explanation.

+ does anyone know when the serial plug in is supported by the Girder 4?



October 10th, 2005, 08:50 AM

I am not sure what the problem is with what you are doing in g3.3

G4 has serial support but it is not compatible with g3.3. ie. you will have to make changes... :( If you want, post in the g4 forum and we will try and get you up and running.