PDA

View Full Version : Firefly setup



doubledose544
December 20th, 2005, 05:42 PM
Ok, New to girder. Downloaded trial of 4.0, Wanting to control my Snapstream Firefly remote control codes with my Tv remote. I am using a uirt usb and went into mapping and there was firefly listed. I expanded the tree down and then highlighted the remote under each funtion and used the learn button for each function, But I cannot make it do any thing. I have looked thru these forums and I have tried to read thru the 100 plus page manual but am stuck on what or how to do this. After about 6 hours of this I decided to post here. Hope someone can point me in theright direction.
Thanks
Wayne

Promixis
December 20th, 2005, 06:52 PM
Hi Wayne,

Next time post after 1 hour ;)

What software do you want to control?

Do you want to use your Firefly remote or the usb uirt and an IR remote.

doubledose544
December 20th, 2005, 07:57 PM
I want to use the usb uirt and an IR remote to control the firefly remote or codes used in Snapstream Beyond Tv 4.

Sorry, not sure what you mean by: Next time post after 1 hour

Thanks
Wayne

Promixis
December 20th, 2005, 09:26 PM
download this...

http://www.promixis.com/download.php?ID=577


read the manual re mapping and attach your events to this file. The default mapping has not been setup with this download yet.