PDA

View Full Version : Callerid help



dg26
March 12th, 2006, 11:28 AM
I am using the script for callerid, I get the popup to display when the phone rings, but no callerid info. I turned on the logger and the info is there.
10:23:39.437 Sunday, March 12, 2006 PRINT:

10:23:39.437 Sunday, March 12, 2006 PRINT: data
10:23:39.218 Sunday, March 12, 2006 PRINT:
NAME=CELLULAR ONE
10:23:39.218 Sunday, March 12, 2006 PRINT: data
10:23:39.218 Sunday, March 12, 2006 PRINT:

10:23:39.218 Sunday, March 12, 2006 PRINT: data
10:23:39.203 Sunday, March 12, 2006 PRINT:
NMBR=xxxx10:23:39.203 Sunday, March 12, 2006 PRINT: data
10:23:39.203 Sunday, March 12, 2006 PRINT:

10:23:39.187 Sunday, March 12, 2006 PRINT: data
10:23:39.187 Sunday, March 12, 2006 PRINT:
TIME=1023
10:23:39.187 Sunday, March 12, 2006 PRINT: data
10:23:39.171 Sunday, March 12, 2006 PRINT:

10:23:39.171 Sunday, March 12, 2006 PRINT: data
10:23:39.171 Sunday, March 12, 2006 PRINT:
DATE=0312
10:23:39.171 Sunday, March 12, 2006 PRINT: data
10:23:38.968 Sunday, March 12, 2006 PRINT:

10:23:38.968 Sunday, March 12, 2006 PRINT: data
10:23:38.734 Sunday, March 12, 2006 PRINT:
RING
10:23:38.734 Sunday, March 12, 2006 PRINT: data
10:23:38.734 Sunday, March 12, 2006 PRINT: nil
But nothing on the popup display. Also no callerid data shows up in the girder variables.
Thanks

dg26
March 18th, 2006, 10:08 AM
Got the scipt going. Can someone explain to me how to create my own phonebook data to replace the NAME with my own names. Thank you.

Promixis
March 18th, 2006, 10:28 AM
Got the scipt going. Can someone explain to me how to create my own phonebook data to replace the NAME with my own names. Thank you.

I would do it using tables.

This is all built for you in Girder 4.

dg26
March 18th, 2006, 11:04 AM
Waiting of LDJ before switching over to G4. Can you explain what you mean in more detail. My scripting skills pretty much revolve around cut and paste. That can even get dicey at times.
Thanks

Promixis
March 18th, 2006, 11:41 AM
Waiting of LDJ before switching over to G4. Can you explain what you mean in more detail. My scripting skills pretty much revolve around cut and paste. That can even get dicey at times.
Thanks

easiest is to use if statements then

ie

id pld1 == 'ASDFASDFASDF' then

pld1 = 'My new name'
end

dg26
March 18th, 2006, 12:21 PM
Mike, I sure appreciate the help here. Would these be better to add to the scipt or in a seperate file. Also, while I have the script working it is not reliable. I runs perfectly after girder starts, but the second call is not sending the data to the OSD. When I check in the variables window, the Data is there.
Thanks