View Full Version : Rotate entire project 180 degrees

September 8th, 2009, 07:55 AM
Just a bit of background so this request doesn't sound too weird...

I've got a hold of a cheap webdt 366 touch screen unit and have microxp installed and running. I really need to rotate the display 180 degrees for the contrast/screen to display well when mounted flat on a wall due to the designed operating angle.

Unfortunately I can't find any third party software that supports the graphics chipset and the drivers have no hardware/software support either. So my last option is to build a ccf upside down :) I was hoping not to have to remake my project from scratch and was wondering if there is any possible way in NRD to rotate the entire project a full 180 degrees? I'm assuming not, but thought I had better ask before facing reality and the large job ahead of me :(


Rob H
September 14th, 2009, 11:35 AM
I'm afraid not, no

September 19th, 2009, 05:38 AM
No worries. Thanks for the reply Rob.

September 20th, 2009, 04:24 PM
i found a util on the web that rotates your desktop through 90 180 degrees, depending on your graphics setup - it might save you some grief....


September 24th, 2009, 08:49 AM
Thanks for the tip, but unfortunately not supported on my device :(