PDA

View Full Version : Girder does not receive input from PIR-1



vim4life
January 6th, 2012, 01:38 PM
Hi

I am having trouble with Girder 5 and my PIR-1. I have tried using both the input and output IR Profile Wizard but neither recognize my remotes. I've sat at the "Please Press: PLAY section with multiple remotes and it never recognizes anything. The same goes for the PIR-1 tab for output wizard. I click learn and press the remote and nothing happens at all. I have the PIR-1 plugged in and there is a green light on the back. Is there any way to verify the PIR-1 is receiving input? Any help would be appreciated. I've had this product for 2 months now and have never gotten it to work.

Ron
January 8th, 2012, 07:32 PM
Sorry you are having trouble with that stuff.

Grab a few remotes from your house and point them at the PIR-1 while Girder is running with the PIR-1 recognized (check the log). You should see all kinds of events coming in. If not you might have a defective unit. Contact sales@promixis.com in that case for a replacement.

For improved learning please check

http://www.promixis.com/forums/showthread.php?21282-PIR-1-Firmware-Update

You'll find a firmware update and a program called IR Studio. It should help with learning a bit.