PDA

View Full Version : Learning mode question:UIRT2 seriell



lar282
June 8th, 2004, 07:03 AM
Hi
Just built my seriell uirt2 device and it actually works. really cool. But having a problem with my projector.

1/ Creating an event in girder and want the transmitter to transmit an IR signal. I choose the uirt plugin and presses learn.
2/ It reacts on the FIRST button press but not the second third and so on, so the learning event is never finished.
3/ If I try to learn a regular event in girder with the same button same remote, it works?
4/ Tried with my stereo also and there all things works, so the uirt2 works.

Here's to my question. Can I take the IR code from girder and "put" it into the learning event? Also the debug IR works and the code looks like this. Can I do anything with that. All I need is 2 button presses from this remote On and Off.

EDIT:Second question:
I have 1.7 version of the firmware. On the homepage it says that 1.8 no longer works with ruuds org hardware. Wich is that??I have built
http://users.skynet.be/sky50985/uirt2a_schem.pdf
Can I use 1.8???

Please help
//Lasse


A0 52 14 21 09 11 08 11 09 11 09 11 09 11 09 10 0A 10 09 11 09 11 09 11 0A 10 0A 11 09 10 09 11 09 11 0A 10 09 11 09 11 13 FF
40 22 13 21 09 11 09 11 09 10 09 10 09 12 09 10 09 11 09 10 0A 10 09 10 09 11 09 11 09 11 09 11 0A 0F 09 11 09 11 09 10 09 11 09 FF
0E E2 13 21 0A 10 09 11 09 11 0A 10 09 10 09 11 0A 10 09 11 0A 10 0A 10 0A 10 09 11 0A 10 09 10 09 11 0A 10 09 10 09 11 14 FF
0F 02 13 21 0A 10 09 11 09 10 09 11 09 10 0A 10 09 10 0A 10 0A 10 09 11 09 11 09 11 0A 10 0A 10 0A 11 09 10 0A 10 0A 10 09 10 0A FF
12 12 14 21 0A 10 09 11 09 11 09 11 09 10 09 11 09 11 09 11 09 11 09 11 0A 10 09 11 09 11 09 11 09 11 0A 10 09 10 09 12 13 FF
0C 92 14 21 09 11 09 11 09 11 09 10 0A 10 09 10 09 10 09 11 09 11 09 11 09 10 0A 10 09 10 0A 10 0A 10 09 10 09 11 0A 10 09 10 09 FF
0E A2 14 21 09 11 0A 10 09 10 09 10 09 11 09 10 09 11 09 10 0A 10 09 11 09 11 09 10 09 11 09 11 09 10 09 11 09 11 09 10 13 FF
0F 02 14 21 09 10 0A 10 09 11 09 10 09 10 0A 10 0A 10 09 10 0A 10 09 10 09 11 09 10 09 10 0A 10 0A 10 09 10 09 11 09 10 0A 10 09 FF
08 C2 13 21 0A 10 0A 10 09 11 09 11 0A 10 09 11 0A 10 09 11 09 11 09 11 09 11 09 11 0A 10 09 11 0A 10 0A 10 09 10 09 11 14 FF
07 A2 14 21 0A 10 09 11 09 11 0A 10 09 10 09 11 0A 10 09 10 0A 10 09 10 09 10 09 10 09 10 09 10 0A 10 0A 10 09 11 09 10 09 10 09 FF
07 F2 14 20 09 11 09 11 0A 10 09 11 09 10 09 11 09 10 09 10 0A 10 09 11 09 11 09 11 0A 10 09 11 09 10 09 10 09 10 09 10 14 FF
07 A2 14 21 09 10 09 11 09 10 09 10 0A 10 09 10 09 11 09 10 0A 10 0A 10 09 10 09 10 09 11 09 10 09 10 09 10 09 11 09 11 09 10 0A FF
07 02 13 21 09 11 09 10 0A 10 09 10 09 12 09 10 09 11 09 11 09 11 09 11 0A 10 0A 10 09 11 09 11 0A 10 09 11 09 10 09 10 15 FF
05 32 14 21 09 10 09 11 09 11 09 11 0A 10 09 11 09 10 0A 10 09 11 0A 10 0A 10 09 10 09 10 09 11 09 11 09 11 0A 10 09 11 0A 10 09 FF
07 A2 13 21 09 10 09 11 0A 10 09 11 09 11 09 11 09 10 09 11 09 11 09 10 09 10 09 11 09 11 09 10 0A 10 09 10 09 11 09 10 14 FF
05 32 13 22 09 10 09 11 09 11 0A 10 09 11 0A 10 09 10 09 11 0A 10 0A 10 0A 10 09 10 09 11 0A 10 09 10 0A 10 09 10 0A 10 09 10 0A FF
06 12 14 21 09 11 09 10 09 11 0A 10 0A 10 0A 10 0A 10 09 11 09 11 09 10 09 10 09 11 09 11 09 11 09 11 0A 10 09 11 09 11 14 FF
07 A2 13 21 0A 10 09 11 0A 10 0A 10 09 11 0A 10 0A 10 0A 10 0A 10 09 11 09 11 0A 10 0A 10 09 10 0A 10 09 11 0A 10 09 10 09 10 0B FF
04 72 14 21 08 11 0A 10 09 11 09 11 09 11 09 11 08 11 09 11 09 10 0A 10 09 11 09 10 0A 10 09 11 09 11 09 10 09 10 09 10 14 FF
07 A2 14 21 09 10 0A 10 0A 10 09 11 0A 10 0A 10 09 10 0A 10 09 10 09 11 09 10 0A 10 0A 10 0A 10 09 10 09 11 09 10 09 11 0A 10 0A FF

lar282
June 8th, 2004, 12:50 PM
OK, chanced it and upgraded.Went fine but still no luck on the standby button. I managed to get the power on button by teaching another remote the command.

Any tips for me?



//Lasse