Results 1 to 3 of 3

Thread: NetRemote feedback

  1. #1
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default NetRemote feedback

    NetRemote feedback may not work in G5 alpha.

    This seems to be because the comserver port and password were not set. The default port is 20005 and the default password is 'girder'. If you are having problems with NetRemote connections then check these settings.
    Last edited by Rob H; September 14th, 2006 at 10:49 AM.
    --Rob

  2. #2
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,550

    Default

    Thanks Rob.
    Ron
    No support through PM

  3. #3
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,550

    Default

    Updated files to prevent above problem. Only needed if you must have no password on your comserver which is not advised.
    Attached Files Attached Files
    Ron
    No support through PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •