Results 1 to 5 of 5

Thread: Logger Blank Variable Inspector Says "Node"

  1. #1
    Join Date
    Sep 2006
    Posts
    27

    Default Logger Blank Variable Inspector Says "Node"

    My logger is blank and my variable inspector is populated exclusively with nodes that say, well, "node".

    Anyone else see this? I'd really like my logger back.

    - Jeff

  2. #2
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    I've never seen this here. Can you make a screenshot of the variable inspector?

    As for the logger, can you make sure that Girder hasn't somehow lost the logger settings? File|Settings|General settings and go to the Logger tab, make sure that you have some of the checkboxes checked.

    Failing that, does the logger show the column headings correctly? You should see at least Source, Details and Time. If not then try View|Reset Windows and Toolbars.
    --Rob

  3. #3
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,553

    Default

    I've seen that happen, I can't remember what caused this. What OS and what Girder version are you running?
    Ron
    No support through PM

  4. #4
    Join Date
    Sep 2006
    Posts
    27

    Default

    Well, I just went to grab the screen cap, and wouldn't you know, everything is working again. There's been a reboot somewhere in the interim, so that must have solved the problem.

    If it happens again, I'll grab a screen cap right away (although there's not much to capture).

    - Jeff

  5. #5
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    Thanks for the update, glad it's working again.
    --Rob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •