Results 1 to 3 of 3

Thread: Device Manager Events

  1. #1
    Join Date
    May 2004
    Location
    Dallas, TX
    Posts
    1,125

    Default Device Manager Events

    Is there a way to have a device only trigger an event if the value falls into or outside of a certain range?

    Speedfan data is presented with current temp, desired temp and warning temp. I want to trigger an event when the device reaches the warning temp not each time it actually changes.
    Rick

    Girder 6.0 - Elk M1 Gold - JRMC 11.1 w/ M-Audio Delta 410 - NetRemote - BlueIris DVR
    Girder 6 Plugins - Elk M1/EZ8, Pushover Connector and more on the way.


    Visit My Showcase

  2. #2
    Join Date
    May 2004
    Location
    Cardigan, UK
    Posts
    9,278

    Default

    If you are inheriting from DeviceItemsContainer you could replace SetItemCondition with your own version that checks this sort of thing.
    --Rob

  3. #3
    Join Date
    May 2004
    Location
    Dallas, TX
    Posts
    1,125

    Default

    I worked around this by adding another control to the device. If the temperature is in the normal range, I set status to Normal otherwise it is set to Alert. This will work just fine.

    Thanks Rob
    Rick

    Girder 6.0 - Elk M1 Gold - JRMC 11.1 w/ M-Audio Delta 410 - NetRemote - BlueIris DVR
    Girder 6 Plugins - Elk M1/EZ8, Pushover Connector and more on the way.


    Visit My Showcase

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •