Results 1 to 10 of 36

Thread: Control protocol StorkAir WHR950

Threaded View

  1. #32
    Join Date
    Nov 2017
    Posts
    2

    Default

    Hi,

    Although this tread is quite old, I hope somebody is still reading it. My question is a bit off-topic, but this is the only source of information I could find on the internet.

    I try to hook up my storkair WHR950 (v1.00) to Domoticz, but the protocol description (htt p: // ww w.see-solut ions.de/sonst iges/Protok ollbesch reibung_Comf oAir.pd f) is not correct for this unit. The code posted by VSDomoticz seems to be correct. My unit also works fine with the maintenance SW posted here. If I sniff the comm port communication I see the following commands come by:

    Code:
    07	F0	00	83	00	30	07	0F
    07	F0	00	85	00	32	07	0F  --> Query temperatures (looking at VSDomoticz code)
    07	F0	00	87	00	34	07	0F  --> Query Ventilators (looking at VSDomoticz code)
    07	F0	00	87	00	34	07	0F
    07	F0	00	89	00	36	07	0F  --> Query Parameters 1(looking at VSDomoticz code)
    07	F0	00	8B	00	38	07	0F  --> Query Parameters 2(looking at VSDomoticz code)
    07	F0	00	8F	00	3C	07	0F
    07	F0	00	91	00	3E	07	0F
    07	F0	00	96	00	43	07	0F
    07	F0	00	98	00	45	07	0F
    07	F0	00	9A	00	47	07	0F
    07	F0	00	9C	00	49	07	0F
    07	F0	00	C9	00	76	07	0F
    Now my question is: does somebody have a full protocol description for my unit, so I can use that to implement communication in Domoticz.

    Kind regards,

    Bastiaan
    Last edited by mog_wai; November 28th, 2017 at 01:07 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •