Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Remote config files

  1. #1
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default Remote config files

    Hi Guys, having created a remote in Girder, is it possible to transfer the config to a girder on another machine without having to go through all the remote creation again and possible using a different button for something by accident? I have tried to find a config file with the same name as the remote I created, but I can't see one. Thanks.

  2. #2
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    Helloooooooooooooo knock knock, anyone on this forum??

  3. #3
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,551

    Default

    Ron
    No support through PM

  4. #4
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    A customer with a question

  5. #5
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,551

    Default

    Did you see the link I posted ?
    Ron
    No support through PM

  6. #6
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    Sorry Ron can't say I did, I thought it was part of your sig, a link to the rules or something. I will check it out.

    Ok read it, that's not what I am asking mate. I have girder on this machine and the one in my lounge, I have been setting up some software to work with one of my remotes on this machine, but the software is for use on the other.
    I saved the GML and moved it to the other machine but when I go to asigne the remote, it's not listed, and I presume I have to use the wizard to create the remote on that machine also.
    Is there not a config file somewhere on this machine which the data for the remote I created is in, that I can just move to the other machine, so my remote is available without going through it all again?

    I don't realy want to write the whole backup of the girder system to the other machine as I have things on that girder which are not on here.
    Last edited by wedgehog; May 27th, 2011 at 11:20 AM.

  7. #7
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    Did you catch what I said above Ron?

  8. #8
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,551

    Default

    No looks like you edited that after I read your original response. The ir data is stored in a filed called irdata.db in your Girder config directory.

    To find your Girder config directory type

    print(gir.GetConfigDirectory()) in Girder's interactive lua console.
    Ron
    No support through PM

  9. #9
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    I thought that was the case :-) Thanks Ron I will check that out.

  10. #10
    Join Date
    Sep 2007
    Location
    UK
    Posts
    55

    Default

    Nope, not in there mate




    I also did a search on the computer for that file, Nothing mate.
    Last edited by wedgehog; May 27th, 2011 at 02:23 PM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •