Results 1 to 2 of 2

Thread: Invalid Char

  1. #1
    Join Date
    Jul 2010
    Posts
    3

    Default Invalid Char

    Hi, need some help in identifying the cause of the error message
    invalid control char near
    `char(0)'
    when loading ccf into NR on my Pda.
    It all works Ok in the Designer. The error first occured after putting a slider control into the mix, after testing with a minimal ccf adding the slider control will cause the error.Also discovered that just saving a good ccf in NRdesigner using save-as will also cause the error also the slider variablewatch code does not function.
    Checked forum answers for this but cannot find the cause in this case.
    Please advise remedy, thanks.
    Have attached relevant test files, lua are same.

    NR 2.076
    NRD 1.1.042
    The slider
    Attached Files Attached Files

  2. #2
    Join Date
    Jul 2010
    Posts
    3

    Default

    Hi, Still cannot get this software to function properly, programs freezing when Axim51v resumes from standby so will wast no more time on it, seems this has more bugs than an un-buried corps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •