Page 1 of 6 123 ... LastLast
Results 1 to 10 of 53

Thread: G6 linux version?

  1. #1
    Join Date
    Jul 2005
    Location
    Gliwice,Poland
    Posts
    120

    Default G6 linux version?

    Hi,
    when can we expect linux varsion of Girder 6?
    Maciej Wąchalski

  2. #2
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,541

    Default

    As soon as Girder 6 goes gold and ZWave is finished, unless I get inspired (and energy) to work on the Linux build. Do you have any specific version of Linux in mind? (as you know Linux is not Linux)
    Ron
    No support through PM

  3. #3
    Join Date
    Jul 2005
    Location
    Gliwice,Poland
    Posts
    120

    Default

    Quote Originally Posted by Ron View Post
    As soon as Girder 6 goes gold and ZWave is finished, unless I get inspired (and energy) to work on the Linux build. Do you have any specific version of Linux in mind? (as you know Linux is not Linux)
    I would like to run Girder on Rasperry PI, so it is A Debian wheezy port, optimised for the Raspberry Pi.
    Maciej Wąchalski

  4. #4
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,541

    Default

    Yeah, i'd like to see that one soon as well

    Too bad compiling Girder + libraries takes about a day on the Raspi, assuming all configuration options were set correctly the first time.
    Ron
    No support through PM

  5. #5
    Join Date
    Nov 2013
    Posts
    3

    Default

    Girder on a Raspberry pi or on a Synology would be great.

    I use the raspberry for a low energy system that’s always on and connect to the network. There is a RaZberry Z-Wave print for Raspberry PI or use the usb cm15 module to connect to X10 modules.

  6. #6
    Join Date
    Jul 2005
    Location
    Gliwice,Poland
    Posts
    120

    Red face

    Quote Originally Posted by Ron View Post
    Yeah, i'd like to see that one soon as well

    Too bad compiling Girder + libraries takes about a day on the Raspi, assuming all configuration options were set correctly the first time.
    Ron, does that mean that You did some tests running Girder on Raspi. Maybe we could give it a try.
    Maciej Wąchalski

  7. #7
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,541

    Default

    I've done some tests mostly trying to get a good build environment setup. At that time Qt 5.0 wasn't final yet so things were,.... well,... very rocky.

    Let me see if I can squeeze a build in this week.
    Ron
    No support through PM

  8. #8
    Join Date
    Jul 2005
    Location
    Gliwice,Poland
    Posts
    120

    Default

    Quote Originally Posted by Ron View Post
    I've done some tests mostly trying to get a good build environment setup. At that time Qt 5.0 wasn't final yet so things were,.... well,... very rocky.

    Let me see if I can squeeze a build in this week.
    Sounds great, can't wait.....
    Maciej Wąchalski

  9. #9
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,541

    Default

    Spent half the day getting Qt 5.2 compiled for the Raspi. Looks like basic Qt is compiling fine,.. just fighting with the webkit built now... after that the Girder build....
    Ron
    No support through PM

  10. #10
    Join Date
    Jul 2005
    Location
    Gliwice,Poland
    Posts
    120

    Default

    Wow,
    looks like You're close to finish, thanks for Your time.
    Maciej Wąchalski

Page 1 of 6 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •