Results 1 to 10 of 29

Thread: Girder 6 on Raspberry Pi

Threaded View

  1. #1
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,553

    Default Girder 6 on Raspberry Pi

    Girder 6 for Raspberry Pi Linux.

    Installation

    1. Install Debian Jessie Raspbian image available from here

    2. Add the Promixis Debian Jessie repo to your sources.list. You can do this by saving the attached file (promixis.list) to your /etc/apt/sources.list.d directory. Or by saving the following line to /etc/apt/sources.list.d/promixis.list

    Code:
    deb http://www.promixis.com/repo/debian/jessie jessie main
    3. Import the Promixis signing key

    Code:
    wget -O - http://www.promixis.com/repo/debian/jessie/salespromixiscom.gpg.key | sudo apt-key add -
    3. As root type apt-get update

    4. As root type apt-get install girder

    Running


    Girder can be run as a service or with the full front-end. Typically you'll want to run only the back-end on the R-Pi and use a different computer to run the front-end. To start the back-end only run ./Girder6Service in the /opt/girder directory. Note that you'll need to run the license app for each user that needs Girder on your Linux system.

    Alternatively you can use the /etc/init.d/girder script to start and stop Girder.

    To run the front-end start x, open a xterm, go to /opt/girder and type ./Girder6.

    Staying up to date

    To update to the latest version of Girder simply type

    apt-get update
    apt-get upgrade


    PIR-1 and PIR-4
    On Debian Linux USB HID devices like the PIR-1 and PIR-4 are by default only accessibly by root. Look at the post below to find out how to give other users access as well:
    https://www.promixis.com/forums/show...n-Raspberry-Pi

    Changes

    See the Windows post for changes.
    September 24, 2014 switched to signed repo and official Debian repo structure.
    September 30, 2014. Fixed HOME setting for init.d launched backend. Previously HOME Was not set causing the init.d launched backend to store it's settings in /.config/... this led to many a confusion. The new build fixes this. This however also means that if you have already configured the init.d backend you have to move the /.config to /root/.config and /.local/share/Promixis to /root/.local/share/Promixis
    Attached Files Attached Files
    Last edited by Ron; May 2nd, 2017 at 08:49 PM.
    Ron
    No support through PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •