Results 1 to 6 of 6

Thread: rfxCOM raspberry Logger Message

  1. #1
    Join Date
    Jul 2014
    Posts
    10

    Default rfxCOM raspberry Logger Message

    I installed Girder 6.1.12.1 on my brandnew rasperrypi 2 and attached the rfxcom box in order to control the blinds by somfy later on.
    When switching on the plugin rfxcom, the Logger shows the message: Could not open rfxcom/security1Actioni.js
    I tired with user root and user pi but no difference.
    Any Ideas?

  2. #2
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,553

    Default

    looks like a case issue. Open file

    <GIRDER>\lua\rfxcom\rfxcom.plugin

    Line 6 ends with the two security1Action.js with a small letter, yet on disk it's capitalized.

    "rfxcom/Security1Action.js", "rfxcom/Security1ActionConfig.js"

    Change that and you should be good.
    Ron
    No support through PM

  3. #3
    Join Date
    Jul 2014
    Posts
    10

    Default

    Thanks Ron
    That solved the first part of the problem. Then the same thing happend as in the thread of Febr. 26. So I put the init.lua File attached in the thread et voilą, it works perfect.
    I'm always delighted about your super fast support.
    Hans-Peter

  4. #4
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,553

    Default

    Did I forget to grab a fix, darn. Could you link to the post?
    Ron
    No support through PM

  5. #5
    Join Date
    Jul 2014
    Posts
    10

    Default

    It's the thread from user andersh, dated February 26, 05:46, titled "RFXCOM on Raspberry". Within that is the attachement I used.
    I cannot find a way on this page to link this post to the one with the attachment.
    Cheers
    Hans-Peter

  6. #6
    Join Date
    Jan 1998
    Location
    Jupiter, FL
    Posts
    13,553

    Default

    Strange I've gone and compared that init.lua to the init.lua from my code repository and it's exactly the same. Let me know if the next RPI release gives you trouble again.
    Ron
    No support through PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •